Vacuum chamber 4,2 l for wood stabilization, stainless steel

Vacuum chamber 4,2 l for wood stabilisation

It is suitable for degassing a wide range of moulding materials (silicone, resin – polyurethane, polyester, epoxy, plaster, wax).

The enhanced chemical resistance of the chamber allows the Resin90 resin can be used to stabilise wood and bone.

The body of the chamber is made of stainless steel, its volume is 4.2 litres, its internal dimensions are 16 cm diameter and 21 cm height. The lid is made of thick tempered glass and the seal is made of vulcanised silicone. This gasket is reliable and has a low tendency to mechanical deformation.

The excellent transparency of the lid allows you to observe the degassing process. The two ball valves control the process and the built-in glycerine vacuum gauge indicates the vacuum in the chamber.

The vacuum chamber is also equipped with an air filter to prevent contamination of the degassed material. It can be attached to the pump by means of a pneumatic coupling with a reinforced hose with an internal diameter of 8 mm and a length of 1,5 m. The product is made of high quality materials with thread sealing.

Contents of the set:

Stainless steel tank 160 × 210 mm

Safety tempered glass lid

Industrial vulcanised 100% silicone gasket (without adhesive), 60°ShA hardness

Air-tight manifold with glycerine vacuum gauge and air filter

Reinforced pneumatic hose with connector for connection to vacuum pump

Technical data

See more our other stabilisation products here.
Follow us on Facebook and Instagram!