Continuous leather belt 50×1020 [mm] with free sharpening paste.

Material: cowhide

The leather belt is recommended for the removal of the burr produced during the sharpening process, by using a sharpening paste.

Due to the nature of the raw material and the tensioning mechanism of the machine used, the belt may stretch up to 5% of the length of the belt during the first few uses. This should be monitored with the equipment being used.
Lateral displacement during use is allowed up to ±2% of the nominal width of the belt due to the production technology and material quality.

The following instructions for use must be followed for all leather belts:

• Maximum applicable belt speed: 12 [m/sec]
• Apply a paste when using.
• Protect from overheating.
• Protect from moisture!
• Use the belt only in the direction of rotation.
• After use, remove the product from the tensioning mechanism to prevent it from stretching

By following the instructions for use you can increase the life of your leather belt!

Follow us on Facebook and Instagram!